Overview
Welcome to our Piston Rods category, featuring precision-engineered rods for hydraulic and pneumatic cylinders. Our rods are manufactured from high-strength carbon steel, alloy steel, and stainless steel, then induction hardened and hard chrome plated for:
·High wear resistance
·Corrosion protection
·Mirror-like surface finish for smooth piston travel
·Long service life and low maintenance
·This category covers all major rod materials to meet the requirements of industrial machinery, construction, agriculture, automotive, and harsh-environment applications.
Product Subcategories
1. Carbon Steel Piston Rods – 45# / 4130
·Surface Treatment: Hard Chrome Plated, Induction Hardened
·Hardness: HRC 58–62
·Applications: Medium- to high-pressure hydraulic and pneumatic cylinders
2. Stainless Steel Piston Rods – 17-4PH / 304 / 316
·Surface Treatment: Hard Chrome Plated, Induction Hardened
·Corrosion Resistance: Excellent for harsh environments
·Applications: Offshore, chemical, food-processing, and automation cylinders
3. Alloy Steel Piston Rods – 20MnV6 / 27SiMn
·Surface Treatment: Hard Chrome Plated, Induction Hardened
·Mechanical Properties: High strength, wear and fatigue resistant
·Applications: Heavy-duty hydraulic cylinders, industrial machinery, mobile equipment
Key Features & Benefits
· High precision H8 tolerances for accurate cylinder assembly
· Mirror-like ID and OD finish for smooth piston movement
· Long-lasting seals and reduced maintenance costs
· Available in metric and imperial sizes
· Induction hardened + hard chrome plating for maximum wear and corrosion resistance
Applications
·Hydraulic cylinders for construction, agricultural, and industrial machinery
·Pneumatic cylinders in automation and robotics
·Heavy-duty lifting equipment and presses
·Mobile machinery, offshore and chemical industry cylinders
Hva er honing? Prosess, verktøy og typiske resultater Et hydraulisk sylinderrør tar 12 minutter å finpusse. Det samme røret ferdig med skiving og rullepolering trenger mindre enn to minutter. Dette tidsgapet på 90 % er grunnen til at flere produsenter revurderer sin interne etterbehandlingsstrategi. H...
Hva er DOM-slange? Produksjonsprosessen forklart DOM beskriver ikke en stålkvalitet. Det står for Drawn Over Mandrel, en sekundær kaldbearbeidingsprosess som forvandler elektrisk motstandssveiset (ERW) rør til et produkt med strammere toleranser, høyere styrke og en jevnere overflate. Grunnmaterialet er typ...
Hva er DOM-rørets mekaniske egenskaper? Mekaniske egenskaper definerer hvordan et DOM-stålrør reagerer på belastning, deformasjon og slitasje. For ingeniører og kjøpere som spesifiserer trukket over mandrel-rør under ASTM A513 Type 5, er det fire beregninger som styrer 90 % av valgbeslutningene: strekkstyrk...
The performance and service life of a piston rod for hydraulic and pneumatic cylinder depend heavily on base material properties. Common choices include C45 carbon steel, 42CrMo alloy steel, and stainless grades like SUS304 or SUS316—selected based on load, corrosion exposure, and operating pressure. At Jiangsu Suao Metal Product Co., Ltd., we cold-draw these materials to achieve surface roughness below Ra 0.2 µm and dimensional tolerances as tight as ±0.02 mm, ensuring smooth reciprocating motion and minimal seal wear in dynamic applications.
Piston rods operate under constant friction and potential impact, making surface hardness a non-negotiable parameter. Induction hardening is widely used for carbon steel rods, achieving case depths of 1.5–3.0 mm with surface hardness of 50–58 HRC. For corrosive environments—such as offshore platforms or chemical processing—we apply chrome plating (typically 20–30 µm) over a hardened substrate, or offer alternatives like nitriding or thermal spray coatings. As a manufacturer with full in-house heat treatment and finishing lines, we ensure every piston rod for hydraulic and pneumatic cylinder meets your exact mechanical and environmental demands.
| Treatment | Hardness (HV) | Corrosion Resistance | Common Use Cases |
| Hard Chrome Plating | 800–1000 | Excellent (with micro-crack control) | Construction machinery, marine hydraulics |
| Induction Hardening + Oil | 500–600 | Moderate (requires protective oil) | Industrial presses, agricultural equipment |
| Nitriding | 700–900 | Good (no plating porosity) | Food-grade pneumatics, clean-room automation |
Even minor deviations in straightness can cause uneven seal compression, leading to premature leakage or rod scoring. High-precision piston rods for hydraulic and pneumatic cylinder typically require straightness within 0.1–0.3 mm per meter. At our facility, we use CNC-controlled roller straightening followed by laser alignment verification. Combined with online dimensional monitoring during cold drawing, this ensures consistent geometry across batches—critical for customers in wind turbine pitch systems or railway braking where reliability is non-negotiable.
While ISO 6020/2 and DIN 24554 define common piston rod sizes, real-world applications often demand non-standard lengths, stepped diameters, or integrated threads. We support high-mix, low-volume production with flexible machining cells capable of chamfering, threading, and end-face grinding—all traceable through our smart manufacturing system. Whether you need a 6-meter rod for a shipyard crane or a short, precision rod for a medical pneumatic actuator, we deliver fully finished piston rod for hydraulic and pneumatic cylinder ready for direct assembly.
